| |
|
 Position：Home > Product > ZN-C type new concentration tank |
 |
|
| ZN-C type new concentration tank |
1.The ZN-C type is an extended cylinder separation section
；
2.To overcome the disadvantage of the secondary steam on the top of the concentration tank being condensed before entering the condenser and returning to the tank. This equipment has changed the condenser to an inclined horizontal type
；
3.To improve the production capacity of the equipment, the heating area of the jacket of the concentration tank, as well as the area of the condenser and cooler, will be increased to varying degrees
；
4.To prevent dead corners in the outlet pipe of the concentration tank, stainless steel spherical cocks are used in this product
；
5.A quick opening hand hole is installed at the bottom of the concentration tank to clean the residual liquid and residue inside the tank
；
6.The ZN-C type divides the heating jacket into two or three sections, and when the liquid level is low, the upper section must be closed to prevent dry wall heating. The bottom is changed to a conical bottom for easy drainage of concentrated liquid.
| Project |
ZN-C-200 |
ZN-C-300 |
ZN-C-500 |
ZN-C-700 |
ZN-C-1000 |
| Evaporation cylinder solution
L |
250 |
400 |
670 |
800 |
1220 |
| Volume of receiving cylinder
L |
150 |
240 |
350 |
500 |
760 |
| Evaporation capacity
kg/n |
70 |
90 |
115 |
140 |
180 |
| Steam pressure
MPa |
<0.3 |
<0.3 |
<0.3 |
<0.3 |
<0.3 |
| Vacuum degree
kg |
<60 |
<60 |
<60 |
<60 |
<60 |
| Heating area
m2 |
1 |
1.4 |
2 |
2.3 |
3 |
| Condensation area
m2 |
2.5 |
4 |
5 |
7 |
8 |
| Weight kg |
630 |
950 |
1350 |
1700 |
2200 |
| Height mm |
2600 |
2650 |
3100 |
3270 |
3550 |
| Occupation mm |
1900×620 |
2140×850 |
2300×950 |
2500×1000 |
2750×1150 |
| | |   |
|
|
中文站
